Execution Condition
WARNING: This page is about a different variant/trim than selected.
VALUE SPECIFICATION - DIAGNOSIS 1
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 8 V |
| Elapsed time after starting the engine | ≥ 200 ms |
VALUE SPECIFICATION - DIAGNOSIS 2
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥8 V |
| Elapsed time after starting the engine | ≥ 200 ms |
| Engine speed | < 5000 rpm |
VALUE SPECIFICATION - DIAGNOSIS 3
| Secondary Parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 8 V |
| Elapsed time after starting the engine | ≥ 200 ms |
| Engine speed | ≥ 5000 rpm |