Execution Condition
WARNING: This page is about a different variant/trim than selected.
| Secondary Parameters |
Execution condition |
| Soaking time |
≥ 21600 s |
| Block heater judgment |
Completed |
| Block heater operation |
Not in operation |
| Secondary Parameters |
Execution condition |
| Battery voltage |
≥ 10.9 V |
| Engine coolant temperature |
≥ 70 °C (158 °F) |
| Intake air amount sum value |
≥ Value of Map 1 |
| Number of experiences under conditions below |
≥ 3 time(s) |
- Continuous time when vehicle speed is less than 4 km/h (2.5 MPH)
|
≥ Value from Map 2 |
- Continuous time when vehicle speed is 40 km/h (24.9 MPH) or more, and intake air amount is 15 g/s (0.53 oz/s) or more
|
≥ 15 s |
TEMPERATURE SPECIFICATION - MAP 1
| Engine coolant temperature °C (°F) |
-20 (-4) |
-10 (14) |
0 (32) |
10 (50) |
20 (68) |
| Intake air amount sum value (g (oz)) |
76000 (2680.52) |
10192 (359.47) |
9028 (318.42) |
7864 (277.36) |
7000 (246.89) |
TEMPERATURE SPECIFICATION - MAP 2
| Engine coolant temperature °C (°F) |
-20 (-4) |
-10 (14) |
5 (41) |
20 (68) |
| Continuous time (s) when vehicle speed is less than 4 km/h (2.5 MPH) |
250 |
40 |
32 |
24 |