LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (M/T Clutch System) >> Release Bearing and Lever >> Removal >> STI Model

STI Model

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Remove the release lever from the transmission.
  3. Using a flat tip screwdriver, remove the release bearing from the clutch cover.
    Fig 1: Removing Release Bearing From Clutch Cover
    G10294387Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals