LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (M/T Clutch System) >> Release Bearing and Lever >> Removal >> Except For STI Model

Except For STI Model

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Remove the dust cover.
    Fig 1: Identifying Release Lever And Dust Cover
    G10294388Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the attachment point of lever spring by inserting a screwdriver through the clutch housing release lever hole. Then remove the release lever together with the release bearing.
    Fig 2: Removing Attachment Point Of Lever Spring
    G10294389Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals