LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Window Washer Fluid

Window Washer Fluid

WARNING: This page is about a different variant/trim than selected.

Check that the window washer fluid level is normal. If the amount of washer fluid is insufficient, check that no leaks are found. Then, add the necessary amount of washer fluid.

NOTE: If there is the vibration, water comes into the layer of air in the washer tank and the water level may drop. This is not a malfunction.
Fig 1: Checking Window Washer Fluid Level
G10264638Courtesy of SUBARU OF AMERICA, INC.