Lock/Unlock And Open/Close Operation Checks Of Doors

WARNING: This page is about a different variant/trim than selected.

Using the key, lock and unlock the door several times to check for normal operation. Open and close the door several times for smooth movement.

Fig 1: Opening Door
Courtesy of SUBARU OF AMERICA, INC.
Completely close the driver's door, and then check the smooth movement with operating door lock knob from lock to unlock several times. Set the door lock knob (A) to lock position. Then pull the inner remote (B) to ensure that doors will not open.
For other doors, place the door lock knob (A) to lock position and then pull the inner remote (B) to ensure that doors will not open.

Fig 2: Identifying Door Lock Knob And Inner Remote
Courtesy of SUBARU OF AMERICA, INC.
Close all the doors, and then press the lock on power door lock switch at driver's side. Check that all doors lock.

Fig 3: Locating Driver Side Power Door Lock Switch Lock
Courtesy of SUBARU OF AMERICA, INC.
Press the driver's side power door lock switch to unlock side. Check that all doors are unlocked.

Fig 4: Locating Driver Side Power Door Lock Switch
Courtesy of SUBARU OF AMERICA, INC.
Check that the passenger's power door lock switch locks and unlocks normally in the same manner.

Fig 5: Locating Passenger Power Door Lock Switch
Courtesy of SUBARU OF AMERICA, INC.
With ACC ON or IGN ON, open the driver's door. Press lock on power door lock. Check that the door is not locked.