LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Information) >> Pre-delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Grommet Installation

Grommet Installation

WARNING: This page is about a different variant/trim than selected.

Install the grommet provided in the glove box to the tie-down hole.

CAUTION: Make sure that the tie-down hole is firmly plugged with the grommet. Otherwise, dust, smell, etc. may come into the passenger compartment indirectly from the rear quarter, via the side sill from the tie-down hole.
Fig 1: Locating Tie-Down Hole Grommet
G10289679Courtesy of SUBARU OF AMERICA, INC.