Parking Brake Assembly (Rear Disc Brake): Inspection

Measure the inner diameter of the rear disc rotor. If scoring or worn is found on the disc, replace the rear disc rotor.
Disc rotor inner diameter:

Specification: 190 mm (7.48 in)

Service limit: 191 mm (7.52 in)
Measure the lining thickness. If it exceeds the limit, replace the brake shoe.
Lining thickness:

Specification: 3.5 mm (0.14 in)

Service limit: 1.5 mm (0.059 in)

NOTE: Replace the right and left parking brake shoe as a set.