Basic Diagnostic Procedure: Procedure: MFD

DIAGNOSTIC PROCEDURE

Step	Check	Yes	No
1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. < Ref. to CHECK , Check List for Interview. >	Did you interview the customer?	Go to step 2.	Interview the customer. < Ref. to CHECK , Check List for Interview. >
2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). >	Is DTC displayed?	Perform the diagnosis according to DTC. < Ref. to LIST , List of Diagnostic Trouble Code (DTC). >	Go to step 3.
3 CHECK MFD. Read the DTC relating the MFD using the Subaru Select Monitor. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >	Is DTC displayed?	Record DTC and time stamp, and perform the diagnosis according to DTC. < Ref. to LIST , List of Diagnostic Trouble Code (DTC). > For time stamp, refer to "LAN SYSTEM". < Ref. to TIME STAMP , CAUTION, General Description. > Go to step 5.	Go to step 4.
4 CHECK MFD. Check the MFD display using the system operation check mode of combination meter. < Ref. to SYSTEM OPERATION CHECK MODE . >	Is the display normal?	System is normal.	Replace the MFD. < Ref. to MULTI-FUNCTION DISPLAY (MFD) . >
5 PERFORM DIAGNOSIS. Perform the Clear Memory Mode. Perform the Inspection Mode. < Ref. to INSPECTION MODE . > Read the DTC relating the MFD using the Subaru Select Monitor.	Is DTC displayed?	Perform diagnosis according to the DTC.	Finish the diagnosis.