LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (WRX) >> Intake Duct >> Removal >> Intake Duct No. 3

Intake Duct No. 3

  1. Remove the collector cover. < Ref. to REMOVAL , Collector Cover. >
  2. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
  3. Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
  4. Remove the brake booster vacuum hose from the clip, and place the brake booster vacuum hose aside so that it does not interfere with the work.
    Fig 1: Locating Brake Booster Vacuum Hose Clips
    G10266554Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the intake duct No. 3 from the throttle body.
    Fig 2: Locating Intake Duct No. 3 Bolt
    G09480084Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals