Intake Duct No. 2

Remove the collector cover. < Ref. to REMOVAL , Collector Cover. >
Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the air intake duct. < Ref. to REMOVAL , Air Intake Duct. >
Remove the intercooler. < Ref. to REMOVAL , Intercooler. >
Remove the radiator sub fan and fan motor. < Ref. to REMOVAL , Radiator Sub Fan and Fan Motor. >
Lift up the vehicle.
Remove the under cover. < Ref. to REMOVAL , Front Linder Cover. >
Disconnect the vacuum hose (A) from the intake duct No. 1, and disconnect the vacuum hose (B) from the air by-pass valve.

Fig 1: Identifying Intake Duct No. 1 And Air By-Pass Valve Vacuum Hose
Courtesy of SUBARU OF AMERICA, INC.
Disengage the clip which secures the air by-pass valve to the intake duct No. 1.

Fig 2: Locating Air By-Pass Valve Clip
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Remove the bolts which secure the intake duct No. 2 to the turbocharger.

Fig 3: Locating Turbocharger Intake Duct No. 2 Bolts
Courtesy of SUBARU OF AMERICA, INC.
Pull out the air by-pass valve from the intake duct No. 1, and remove the intake duct No. 2 from the intake manifold.

Fig 4: Locating Intake Manifold Bolt
Courtesy of SUBARU OF AMERICA, INC.