Intake Duct No. 1

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Note. >
Remove the air intake duct. < Ref. to REMOVAL , Air Intake Duct. >
Disconnect the vacuum hose from vacuum pipe.

Fig 1: Locating Vacuum Hose
Courtesy of SUBARU OF AMERICA, INC.
Lift up the vehicle.
Remove the under cover. < Ref. to REMOVAL , Front Under Cover. >
Disconnect the connector from the wastegate control solenoid valve.

Fig 2: Locating Wastegate Control Solenoid Valve Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the PCV pipe (A) from the intake duct No. 1, and disconnect the vacuum control hose (B) from the wastegate control solenoid valve.

Fig 3: Identifying PCV Pipe And Vacuum Control Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake boot from the intake duct No. 1, and disengage the clip which secures the air by-pass valve to the intake duct No. 1.

Fig 4: Locating Air Intake Boot Clamp And Clip
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which secure the intake duct No. 1 to the turbocharger, and remove the intake duct No. 1.

Fig 5: Locating Intake Duct No. 1 Bolts
Courtesy of SUBARU OF AMERICA, INC.