LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Hybrid Electric Vehicle System (Diagnostics) (Hybrid)) >> Fail-Safe Chart >> List >> Hybrid Powertrain Control System

Hybrid Powertrain Control System

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

If any of the following DTCs are stored in the hybrid powertrain control system, the vehicle enter the appropriate fail safe pattern.

DTC Fail safe pattern Prohibited concurrent controls Availability of system operation check mode
P0506 Fail safe pattern 1: Illuminates the hybrid fail lamp. - (2)
P0507 - (2)
P0516 - (2)
P0517 - (2)
P0572 - (2)
P0573 - (2)
P058D - (4)
P0719 - (2)
P0724 - (2)
P1C04 - (2)
P1C05 - (2)
P1C16 - (2)
P1C17 - (2)
U0131 - (1)
U0140 - (1)
U0151 - (1)
U0155 - (1)
U0287 - (1)
U0420 - (1)
U0422 - (1)
U0423 - (1)
U0452 - (1)
U0588 - (1)
P0556 Fail safe pattern 2:
Prohibits EV traveling and Auto Start Stop. If EV traveling or Auto Start Stop is in process, the engine is restarted.
Illuminates the hybrid fail lamp.
- (2)
P057B Prohibits regeneration control by brake system. (2)
P057C Prohibits regeneration control by brake system. (2)
P057D Prohibits regeneration control by brake system. (2)
P065A - (2)
P1C00 - (4)
P1C08 - (2)
P1C0C Prohibits regeneration control by brake system. (2)
P1C0D Prohibits regeneration control by brake system. (2)
P1C10 - (2)
P1C11 - (2)
P1C12 - (2)
P2158 Prohibits regeneration control by brake system. (2)
U0164 - (1)
U0122 - (1)
U0416 - (1)
U0424 - (1)
U1711 - (1)
P0620 Fail safe pattern 3:
Prohibits EV traveling and Auto Start Stop. If EV traveling or Auto Start Stop is in process, the engine is not restarted.
Illuminates the hybrid fail lamp.
- (2)
P6EF - (2)
P1C06 - (2)
P1C07 - (2)
P1C09 - (2)
P1C14 - (3)
P1C18 - (2)
U1676 - (1)
U1720 - (1)
U0111 Fail safe pattern 4:
Deactivates the hybrid system.
Illuminates the hybrid fail lamp.
- (1)
U0412 - (1)
P1C1E Prohibits reconnection of the High voltage battery until the condition is restored. (2)
P0604 Fail safe pattern 5:
Deactivates the hybrid system. Also, driving power and shifting commands by the hybrid powertrain control module are stopped, and instead they are controlled by ECM and TCM respectively. Illuminates the hybrid fail lamp.
- (2)
P0605 - (2)
P0A1D - (2)
U0073 - (1)
U0075 - (1)
U0076 - (1)
U0100 - (1)
U0101 - (1)
U0110 - (1)
U0401 - (1)
U0402 - (1)
U0411 - (1)
U1100 - (1)
U1101 - (1)
U1401 - (1)
U1402 - (1)
(1) Prohibits all «System Operation Check Modes».
(2) Prohibits «Engine only Drive Mode» and «Auto Start Stop Cancel Drive Mode (Engine only or Engine + Motor)».
(3) Prohibits «Engine only Drive Mode», «Auto Start Stop Cancel Drive Mode (Engine only or Engine + Motor) », and «ISG Voltage Control».
(4) Prohibits «Engine only Drive Mode», «Auto Start Stop Cancel Drive Mode (Engine only or Engine + Motor) », and «12V Battery Relay Operation».