Drive Motor Control System
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
If any of the following DTCs are stored in the drive motor control system, the vehicle enter the appropriate fail safe pattern.
| DTC | Fail safe pattern | Prohibited concurrent controls | Availability of system operation check mode | ||
|---|---|---|---|---|---|
| P0A90 | Fail safe pattern 1: Illuminates the hybrid fail lamp. |
- | - | ||
| P0C0D | - | - | |||
| P0A94 | Fail safe pattern 2: Prohibits EV traveling and Auto Start Stop. If EV traveling or Auto Start Stop is in process, the engine is restarted. Illuminates the hybrid fail lamp. |
- | - | ||
| P1C34 | - | - | |||
| P1C35 | - | - | |||
| P0604 | Fail safe pattern 3: Deactivates the hybrid system. Illuminates the hybrid fail lamp. |
- | - | ||
| P0605 | - | - | |||
| P06B1 | - | - | |||
| P06B2 | - | - | |||
| P0A1B | - | (1) | |||
| P0A2A | - | - | |||
| P0A2C | - | - | |||
| P0A2D | - | - | |||
| P0A3C | - | - | |||
| P0A44 | - | - | |||
| P0A5D | - | - | |||
| P0A60 | - | - | |||
| P0A63 | - | - | |||
| P0A78 | - | - | |||
| P0AED | - | - | |||
| P0AEE | - | - | |||
| P0AF2 | - | - | |||
| P0AF3 | - | - | |||
| P0BD1 | - | - | |||
| P0BD2 | - | - | |||
| P0BE6 | - | - | |||
| P0BE7 | - | - | |||
| P0BE8 | - | - | |||
| P0BEA | - | - | |||
| P0BEB | - | - | |||
| P0BEC | - | - | |||
| P0BEE | - | - | |||
| P0BEF | - | - | |||
| P0BF0 | - | - | |||
| P0BFD | - | - | |||
| P0C05 | - | - | |||
| P0C0C | - | - | |||
| P0C79 | - | - | |||
| P0DA8 | - | - | |||
| P1C20 | - | - | |||
| P1C22 | - | (1) | |||
| P1C24 | - | - | |||
| P1C25 | - | - | |||
| P1C26 | - | - | |||
| P1C27 | - | - | |||
| P1C2A | - | - | |||
| P1C30 | - | - | |||
| P1C31 | - | - | |||
| U0076 | - | (1) | |||
| U0111 | - | (1) | |||
| U0412 | - | (1) | |||
| U1290 | - | (1) | |||
| U1591 | - | (1) | |||
| P0A82 | - | - | |||
| P0A83 | - | - | |||
| P0A3F | Fail safe pattern 4: Deactivates the hybrid system. Also, driving power and shifting commands by the hybrid powertrain control module are stopped, and instead they are controlled by ECM and TCM respectively. Illuminates the hybrid fail lamp. |
- | - | ||
| P0A43 | - | - | |||
| P0A40 | - | - | |||
| P0C52 | - | - | |||
| P0C5C | - | - | |||
| P0CDC | - | - | |||
| P0CDD | - | - | |||
|
|||||