LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Hybrid Electric Vehicle System (Diagnostics) (Hybrid)) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle

Preparation For Drive Cycle

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the 12 volt auxiliary battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE .>
  3. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .>
    NOTE:
    • If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> After solving the DTC, repeat from step  2).
    • Perform the drive cycle after warming up the engine except when any conditions such as oil temperature at starting are specified.
scientia non olet · About LEMON Manuals