Combination Meter
WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. < Ref. to CHECK , Check List for Interview.> |
Did you interview the customer? | Go to step 2 . | Interview the customer. < Ref. to CHECK , Check List for Interview.> |
| 2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> |
Is DTC displayed? | Perform the inspection according to the basic diagnostic procedure for LAN system. < Ref. to PROCEDURE , Basic Diagnostic Procedure.> < Ref. to PROCEDURE , Basic Diagnostic Procedure.> | Go to step 3 . |
| 3 CHECK COMBINATION METER. Using the Subaru Select Monitor, read DTC of combination meter. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .> |
Is DTC displayed? | Record DTC and time stamp, and perform the diagnosis according to DTC. < Ref. to LIST , List of Diagnostic Trouble Code (DTC).> For time stamp, refer to "LAN SYSTEM". < Ref. to TIME STAMP , CAUTION, General Description.> < Ref. to TIME STAMP , CAUTION, General Description.> | Go to step 4 . |
| 4 CHECK COMBINATION METER. Check the operation of combination meter. < Ref. to SYSTEM OPERATION CHECK MODE .> |
Is it operating normally? | System is normal. | Replace the combination meter. < Ref. to COMBINATION METER .> |