LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Key Lock Cylinders >> Replacement >> Glove Box Lid

Glove Box Lid

  1. Remove the pocket assembly.
    1. Attach the protective tape (a) to the panel center LWR.
    2. Remove the damper COMPL - pocket.
    3. Release the stoppers and remove the pocket assembly by pulling it toward you.
      Fig 1: Removing Pocket Assembly
      G08316229Courtesy of SUBARU OF AMERICA, INC.
  2. Replace the key cylinder.
    1. Pull up the lock knob.
    2. Push out the key cylinder from the pocket assembly while pressing in the metal plate.
      Fig 2: Pushing Out Key Cylinder From Pocket Assembly
      G08319275Courtesy of SUBARU OF AMERICA, INC.
  3. Install each part in the reverse order of removal.
scientia non olet · About LEMON Manuals