LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Intake System (Induction) (Hybrid)) >> Air Intake Duct >> Removal

Air Intake Duct: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to OFF.
  2. Remove the clip (A) and the bolt (B) which hold the air intake duct.
  3. Remove the protrusion on the air intake duct from the air intake boot No. 1, and remove the air intake duct.
    Fig 1: Identifying Air Intake Duct Clip And Bolt
    G09487303
scientia non olet · About LEMON Manuals