Combination Meter
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how trouble occurs. < Ref. to CHECK , Check List for Interview. > |
Did you interview the customer? | Go to step 2. | Interview the customer. < Ref. to CHECK , Check List for Interview. > |
| 2 CHECK CAN COMMUNICATION. Read the DTC of the CAN system using the Subaru Select Monitor. < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). > < Ref. to OPERATION , Read Diagnostic Trouble Code (DTC). > |
Is DTC displayed? | Perform the inspection according to the basic diagnostic procedure for LAN system. < Ref. to PROCEDURE , Basic Diagnostic Procedure. > < Ref. to PROCEDURE , Basic Diagnostic Procedure. > | Go to step 3. |
| 3 CHECK COMBINATION METER. Using the Subaru Select Monitor, read DTC of combination meter. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . > |
Is DTC displayed? | Record DTC and time stamp, and perform the diagnosis according to DTC. < Ref. to
LIST , List of Diagnostic Trouble Code (DTC). > For time stamp, refer to "LAN SYSTEM". < Ref. to TIME STAMP , CAUTION, General Description. > < Ref. to TIME STAMP , CAUTION, General Description. > |
Go to step 4. |
| 4 CHECK COMBINATION METER. Check the operation of combination meter. < Ref. to SYSTEM OPERATION CHECK MODE . > |
Is it operating normally? | System is normal. | Replace the combination meter. < Ref. to COMBINATION METER . > |