Power Supply Outlet Socket (Installed To The Front Side): Installation

Installation of clip
1. Engage the 2 claws and install the clip.
  
  Fig 1: Locating Claws And Clip
  Courtesy of SUBARU OF AMERICA, INC.
Installation of power supply outlet socket assembly No. 2
1. Connect the connector.
2. Align the groove of the clip with the rib of power supply outlet socket assembly No. 2 as shown in the figure, and install assembly No. 2.
  
  Fig 2: Aligning Groove Of Clip With Rib Of Power Supply Outlet Socket Assembly No. 2
  Courtesy of SUBARU OF AMERICA, INC.
Installation of glove compartment door assembly (Refer to INSTALLATION )