TRANSMISSION VALVE BODY Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

Removal of transmission 3 way solenoid Assembly (SR)
1. Remove the bolt to remove the transmission 3 way solenoid Assembly (SR).
  
  Fig 1: Removing Transmission 3 Way Solenoid Assembly (SR) Bolt
  Courtesy of SUBARU OF AMERICA, INC.
Removal of transmission 3 way solenoid Assembly (S4)
1. Remove the bolt to remove the transmission 3 way solenoid Assembly (S4) and harness clamp.
  
  Fig 2: Removing Transmission 3 Way Solenoid Assembly (S4) Bolt
  Courtesy of SUBARU OF AMERICA, INC.
Removal of transmission 3 way solenoid Assembly (S1)
1. Remove the transmission 3 way solenoid Assembly (S1).
  
  Fig 3: Removing Transmission 3 Way Solenoid Assembly (S1)
  Courtesy of SUBARU OF AMERICA, INC.
Removal of transmission 3 way solenoid Assembly (S2)
1. Remove the transmission 3 way solenoid Assembly (S2).
  
  Fig 4: Removing Transmission 3 Way Solenoid Assembly (S2)
  Courtesy of SUBARU OF AMERICA, INC.
Removal of transmission 3 way solenoid Assembly (S3)
1. Remove the bolt to remove the transmission 3 way solenoid Assembly (S3).
  
  Fig 5: Removing Transmission 3 Way Solenoid Assembly (S3)
  Courtesy of SUBARU OF AMERICA, INC.