LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (Service Information)) >> OIL COOLER Assembly >> Removal

OIL COOLER Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Removal of under cover front AL (refer to REMOVAL )
  2. Removal of under cover COMPL T/M (refer to REMOVAL )
  3. Drain of coolant (SUBARU genuine Super Coolant) (refer to COOLANT (FA20) )
  4. Disconnection of transmission oil cooler hose
    1. Move 2 clamps and disconnect the 2 oil cooler hoses.
      CAUTION: Have a container ready for catching ATF remaining in the transmission oil cooler hoses.
      Fig 1: Locating Clamps And Oil Cooler Hoses
      G10214293Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnection of water by-pass hose
    1. Move 2 clamps and disconnect the 2 water by-pass hoses from the transmission oil cooler Assembly.
      CAUTION: Have a container ready for catching coolant remaining in the water bypass hoses.
      Fig 2: Locating Clamps And Water By-Pass Hose
      G10214294Courtesy of SUBARU OF AMERICA, INC.
  6. Removal of transmission oil cooler Assembly
    1. Remove 3 bolts to remove the transmission oil cooler Assembly.
      Fig 3: Locating Bolts To Transmission Oil Cooler Assembly
      G10214295Courtesy of SUBARU OF AMERICA, INC.
    2. Move 2 clamps and remove the 2 transmission oil cooler hoses.
      Fig 4: Locating Clamps And Transmission Oil Cooler Hoses
      G10214296Courtesy of SUBARU OF AMERICA, INC.
    3. Remove 2 bolts to remove the transmission oil cooler from the oil cooler bracket.
      Fig 5: Locating Transmission Oil Cooler To Oil Cooler Bracket Bolts
      G10214297Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals