LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (Service Information)) >> NEUTRAL START SWITCH Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check of neutral start switch Assembly
    1. Pull the parking brake and turn the ignition switch to ON.
    2. Depress the brake pedal and check that the engine cannot start when the select lever is in positions other than "N" or "P".
    3. Check that the shift position is displayed on the shift position indicator in the combination meter and that the reverse warning buzzer sounds at "R" position.
scientia non olet · About LEMON Manuals