Circuit description
WARNING: This page is about a different variant/trim than selected.
The transmission control computer ASSY detects M position based on signals from the manual mode switch ASSY.
DTC DETECTION CONDITION
| DTC No. SAE/TCCS |
DTC detecting condition
- Diagnosis condition
- Abnormal condition
- Abnormal period
- Other
|
Inspection parts |
| P1817 |
- Shift position sensor is normal and learning control is not prohibited.
- M switch is ON when select lever is in P, N, or R position
- Continuing 2 seconds
- 1 trips
|
- Manual mode switch ASSY
- Wiring harness and connector
- Transmission control computer ASSY
|