LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System (Includes Seat Heater) >> Rear Seat Assembly >> Disassembly

Rear Seat Assembly: Disassembly

  1. Removal of the rear seat backrest lock cover
    1. Release 3 claws and the guide, and remove the rear seat backrest lock cover.
      NOTE: Remove both parts using the same procedures.
      Fig 1: Locating Rear Seat Backrest Lock Cover, Claws And Guide
      G10216932Courtesy of SUBARU OF AMERICA, INC.
  2. Removal of the rear seat backrest cover with pad
    1. Remove the 4 clips.
      Fig 2: Locating Rear Seat Backrest Cover With Pad And Clips
      G10216933Courtesy of SUBARU OF AMERICA, INC.
    2. Release the hook and turn over the bench type rear seat backrest cover.
      Fig 3: Locating Rear Seat Backrest Cover Hook
      G10216934Courtesy of SUBARU OF AMERICA, INC.
    3. Release 6 hooks and remove the rear seat backrest cover with pad from the rear seat backrest frame.
      Fig 4: Locating Rear Seat Backrest Cover With Pad Hooks
      G10216935Courtesy of SUBARU OF AMERICA, INC.
  3. Removal of the bench type rear seat backrest cover
    1. Remove 10 hog rings and remove the bench type rear seat backrest cover from the bench type rear seat backrest pad.
      Fig 5: Locating Bench Type Rear Seat Backrest Cover Hog Rings
      G10216936Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of the rear seat backrest lock rod LH
    1. Release the claw.
    2. Pull off the rear seat backrest lock rod LH to the direction of the arrow in the figure to remove it from the rear seat backrest lock sub-assembly LH.
      Fig 6: Removing Rear Seat Backrest Lock Rod LH
      G10216937Courtesy of SUBARU OF AMERICA, INC.
  5. Removal of the rear seat backrest lock rod RH
    NOTE: Remove the part in the same manner as LH side.
  6. Removal of the rear seat backrest lock release button
    1. Rotate the rear seat backrest lock release button counterclockwise to remove it from the rear seat backrest lock rod LH and RH.
      Fig 7: Rotating Rear Seat Backrest Lock Release Button
      G10216938Courtesy of SUBARU OF AMERICA, INC.
  7. Removal of the rear seat backrest lock sub-assembly LH
    1. Remove 2 bolts and remove the rear seat backrest lock sub-assembly LH from the rear seat backrest frame.
      Fig 8: Locating Rear Seat Backrest Lock Sub-Assembly LH Bolts
      G10216939Courtesy of SUBARU OF AMERICA, INC.
  8. Removal of the rear seat backrest lock sub-assembly RH
    NOTE: Remove the part in the same manner as LH side.
  9. Removal of the rear seat backrest lock release band
    1. Remove the screw, and remove the rear seat backrest lock release band.
      Fig 9: Locating Rear Seat Backrest Lock Release Band Screw
      G10216940Courtesy of SUBARU OF AMERICA, INC.
  10. Removal of the rear seat cushion bracket
    1. Remove the screw, and remove the rear seat cushion bracket from the rear seat cushion assembly LH.
      NOTE: Perform the same procedures for the RH side.
      Fig 10: Locating Rear Seat Cushion Bracket Screw
      G10216941Courtesy of SUBARU OF AMERICA, INC.
  11. Removal of the separate type rear seat cushion cover LH
    1. Remove 40 hog rings.
      Fig 11: Locating Hog Rings
      G10216942Courtesy of SUBARU OF AMERICA, INC.
    2. Remove 3 hog rings, and remove the separate type rear seat cushion cover LH from the separate type rear seat cushion pad LH.
      Fig 12: Locating Hog Rings
      G10216943Courtesy of SUBARU OF AMERICA, INC.
  12. Removal of the separate type rear seat cushion cover RH
    NOTE: Remove the part in the same manner as LH side.
scientia non olet · About LEMON Manuals