LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Stop Light Switch >> Unit Inspection

Unit Inspection

  1. Inspection of the stop light switch assembly.
    1. Resistance check
      1. Measure the resistance according to the following chart.
        RESISTANCE

        Inspection terminals Inspection conditions Standard value
        1 - 2 When the shaft is not pushed in Less than 1 Ω
        When the shaft is pushed in 10 kΩ or more
        Fig 1: Stop Light Switch Connector Terminal Identification
        G09492408Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals