LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX STI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (STI) >> Chamber Assembly >> Installation >> Hose

Chamber Assembly: Installation: Hose

  1. Connect the hose (rear) and install clip (A).
    Fig 1: Locating Hose (Rear)
    G10265183Courtesy of SUBARU OF AMERICA, INC.
  2. Install the cowl panel. <Ref. to INSTALLATION , Cowl Panel.>
  3. Connect the hose (front).
    Fig 2: Locating Hose (Front)
    G10265182Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Align the alignment mark (a) on the chamber assembly to the alignment mark (b) on the hose (front) to connect.
    Fig 3: Identifying Chamber Assembly And Hose (Front) Alignment Marks
    G10265190Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals