Both High And Low Pressure Sides Are Low
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK REFRIGERANT LEAKAGE
. Check the refrigerant for leakage. <Ref. to INSPECTION , Refrigerant Leak Check.>
NOTE:
When the pressure on the high-pressure side is less than 0.69 Mpa: Go to Step 2.
|
Are there any refrigerant leakage? | Repair the refrigerant leakage. | Go to step 2 . |
| 2 FILL PROPER AMOUNT OF REFRIGERANT
. Drain the refrigerant completely, and then refill the proper amount of refrigerant. |
Is the refrigerant pressure within the specified range? | Refrigerant pressure is normal. | Perform appropriate inspection with pressure symptoms. |