Clutch Switch (Cruise Control)

WARNING: This page is about a different variant/trim than selected.

Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.
Clutch pedal full stroke A:

STI model

130 - 135 mm (5.12 - 5.31 in)

Except for STI model

135 - 140 mm (5.31 - 5.51 in)

Tightening torque:

T: 8 N.m (0.8 kgf-m, 5.9 ft-lb)

Fig 1: Identifying Clutch Pedal Full Stroke
Courtesy of SUBARU OF AMERICA, INC.
If the clutch pedal stroke is out of specification, adjust the stroke. <Ref. to ADJUSTMENT , Clutch Pedal.>
Connect the clutch switch connector.