Clutch Pedal: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the clutch switches.
Remove the clip, assist spring, rod and bushing.

Fig 1: Identifying Clip, Assist Spring, Rod And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring pin and lever.

Fig 2: Identifying Spring Pin And Lever
Courtesy of SUBARU OF AMERICA, INC.
Remove the clutch pedal and bushings.

Fig 3: Identifying Clutch Pedal And Bushings
Courtesy of SUBARU OF AMERICA, INC.
Remove the stopper and clutch pedal pad from the clutch pedal.

Fig 4: Identifying Stopper And Clutch Pedal Pad
Courtesy of SUBARU OF AMERICA, INC.
Remove the stopper from the clutch pedal bracket.

Fig 5: Identifying Clutch Pedal Bracket Stopper

Courtesy of SUBARU OF AMERICA, INC.