Malfunction Indicator Light Does Not Go Off: Trouble Symptom
WARNING: This page is about a different variant/trim than selected.
Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. | Is DTC of engine or LAN system displayed? <Ref. to OPERATION , Read Diagnostic Trouble Code (DTC).> | Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> | Check the combination meter system. <Ref. to BASIC DIAGNOSTIC PROCEDURE .> |