LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Emission Control Systems (Aux. Emission Control Devices) (STI)) >> Purge Control Solenoid Valve >> Removal >> Purge Control Solenoid Valve 1

Purge Control Solenoid Valve 1

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the bolts which secure purge control solenoid valve 1 to the intake manifold, and disconnect the connector from the purge control solenoid valve 1.
    Fig 1: Locating Purge Control Solenoid Valve Bolts
    G10265027Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the vacuum hose and the vacuum control hose from purge control solenoid valve 1.
scientia non olet · About LEMON Manuals