Timing Belt Cover: Installation

WARNING: This page is about a different variant/trim than selected.

Install front timing belt cover (E).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the timing belt cover LH (D) together with the engine harness stay (C).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the timing belt cover RH (B) together with the engine harness cover (A).
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)

Fig 1: Loosening Front Timing Belt Cover Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the crank pulley. <Ref. to INSTALLATION , Crank Pulley.>
Install the secondary air pump. <Ref. to INSTALLATION , Secondary Air Pump.>