LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (STI)) >> Crank Pulley >> Removal

Crank Pulley: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine assembly installed to body.
  1. Remove the V-belts. <Ref. to REMOVAL , V-belt.>
  2. Use the ST to lock the crank pulley, and remove the crank pulley bolt.

    ST 499977100 CRANK PULLEY WRENCH

    Fig 1: Removing Crank Pulley Bolt Using Crank Pulley Wrench (499977100)
    G08539251Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crank pulley.
scientia non olet · About LEMON Manuals