Throttle Sensor Inspection (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (engine OFF)
- Read the throttle opening angle signal and voltage of throttle sensor using Subaru Select Monitor. <Ref. to DISPLAY CURRENT ENGINE DATA (NORMAL MODE) , OPERATION, Subaru Select Monitor.>
| Throttle sensor | Throttle opening angle signal | Standard |
|---|---|---|
| Main | 0.0% | Approx. 0.6 V |
| 100.0% | Approx. 3.96 V | |
| Sub | 0.0% | Approx. 1.48 V |
| 100.0% | Approx. 4.17 V |