LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Manual Transaxle & Differential (TY75) (W/O STI)) >> Reverse Idler Gear >> Assembly >> Reverse Idler Gear ASSY

Reverse Idler Gear ASSY

WARNING: This page is about a different variant/trim than selected.
  1. Attach the reverse idler sub gear and reverse idler spring.
    NOTE: Point the stamp (marking A) towards the outside, and install the reverse idler sub gear.
    Fig 1: Attaching Reverse Idler Sub Gear And Reverse Idler Spring
    G10268875Courtesy of SUBARU OF AMERICA, INC.
  2. Install the friction plate and snap ring.
    NOTE: Make sure the friction plate is installed in the proper direction.
    Fig 2: Installing Friction Plate And Snap Ring
    G10268876Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals