LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Manual Transaxle & Differential (TY85) (STI)) >> Transfer Drive Gear >> Assembly

Transfer Drive Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing.
    NOTE: Use a new ball bearing.

    ST1 499247400 INSTALLER

    ST2 398497701 SEAT

    Fig 1: Installing Ball Bearing
    G05003318Courtesy of SUBARU OF AMERICA, INC.
  2. Install the snap ring.
    Fig 2: Installing Snap Ring
    G05003316Courtesy of SUBARU OF AMERICA, INC.
  3. Inspect the clearance between the snap ring and the ball bearing. <Ref. to INSPECTION , Transfer Drive Gear.>
scientia non olet · About LEMON Manuals