LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Manual Transaxle & Differential (TY85) (STI)) >> Preparation for Overhaul >> Procedure

Preparation for Overhaul: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Clean oil, grease, dirt and dust from the transmission.
  2. Attach the ST on the transmission.

    ST 18632AA000 STAND ASSY

    Fig 1: Attaching ST On Transmission
    G05336016Courtesy of SUBARU OF AMERICA, INC.
  3. Apply oil to rotating parts before assembly.
  4. When reusing disassembled parts, reinstall in the original positions and directions.
  5. Gaskets, lock washers and lock nuts must be replaced with new parts.
  6. Apply liquid gasket to the specified areas to prevent leakage.