Side Retainer

WARNING: This page is about a different variant/trim than selected.

Remove the O-rings.

Fig 1: Removing O-Rings
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil seal.

Fig 2: Removing Oil Seal
Courtesy of SUBARU OF AMERICA, INC.
Remove the claw of ST1, and attach the claw of ST2.
ST1 398527700 PULLER ASSY

ST2 18760AA000 CLAW

Fig 3: Removing Claw Of ST1
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the taper roller bearing outer race from the side retainer.
ST1 398527700 PULLER ASSY

ST2 18760AA000 CLAW

Fig 4: Removing Taper Roller Bearing Outer Race From Side Retainer
Courtesy of SUBARU OF AMERICA, INC.