Differential Case

WARNING: This page is about a different variant/trim than selected.

Fix the differential assembly on a vice, and remove the hypoid driven gear.
ST 18270KA020 SOCKET (E20)

Fig 1: Removing Hypoid Driven Gear
Courtesy of SUBARU OF AMERICA, INC.
Remove the side bearing of the hypoid driven gear using the ST.
ST 399527700 PULLER SET

Fig 2: Removing Side Bearing Of Hypoid Driven Gear Using ST
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the taper roller bearing.
ST 498077000 REMOVER

Fig 3: Removing Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.