LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Manual Transaxle & Differential (TY85) (STI)) >> Front Differential Assembly >> Assembly >> Side Retainer

Side Retainer

WARNING: This page is about a different variant/trim than selected.
NOTE: Install the oil seal and O-ring of side retainer after the adjustment of backlash and tooth contact.
  1. Attach the taper roller bearing outer race to the side retainer.
  2. Using the ST, install the oil seal.

    ST 18675AA000 DIFFERENTIAL SIDE OIL

    SEAL INSTALLER

    NOTE:
    • Use a new oil seal.
    • Apply oil to the oil seal lips.
    Fig 1: Installing Oil Seal
    G05002726Courtesy of SUBARU OF AMERICA, INC.
  3. Install the O-rings.
    NOTE: Use new O-rings.
    Fig 2: Installing O-Rings
    G10269212Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals