LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Exhaust System (STI)) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the center exhaust pipe from rear exhaust pipe.
    Fig 1: Locating Rear Center Exhaust Pipe Bolts
    G10265512Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the muffler from rear exhaust pipe.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    Fig 2: Locating Rear Exhaust Pipe Bolts
    G10265532Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    Fig 3: Locating Cushion Rubber
    G10265533Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals