LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Lubrication System (STI)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the generator from the bracket. <Ref. to REMOVAL , Generator.>
  3. Disconnect the terminal from oil pressure switch.
    Fig 1: Identifying Oil Pressure Switch Terminal
    G04997911Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil pressure switch.
Fig 2: Identifying Oil Pressure Switch
G04997912Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals