Enable Conditions

WARNING: This page is about a different variant/trim than selected.

Monitor A1: Primary oxygen sensor fluctuation

ENGINE SPEED SPECIFICATION

Secondary Parameters	Enable Conditions
Battery voltage	≥ 10.9 V
Atmospheric pressure	≥ 75.1 kPa (563 mmHg, 22.2 inHg)
Closed loop control with primary oxygen sensor	Active
Engine speed	> 1600 rpm and < 3200 rpm
Intake air mass	≥ 0.80 g/rev (0.03 oz/rev)

Monitor B1: Crankshaft speed fluctuation

VEHICLE SPEED SPECIFICATION

Secondary Parameters	Enable Conditions
Misfire diagnosis monitor	Active
Accelerator pedal position	= 0%
Vehicle speed	≤ 2 km/h (1.2 MPH)
Engine speed	> 550 rpm and < 1065 rpm
Intake air mass per revolution	> 0 g/rev (0 oz/rev) and < 10 g/rev (0.35 oz/rev)