LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4DOTC) (STI)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0852 Neutral Switch Input Circuit High (Mt Model) >> Enable Conditions

Enable Conditions

WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITIONS

Secondary Parameters Enable Conditions
Battery voltage ≥ 10.9 V
Change from driving condition a) to b)
  1. Engine speed 600 rpm - 900 rpm & Vehicle speed ≤ 0 km/h (0 MPH)
  2. Engine speed 1400 rpm - 2200 rpm & Vehicle speed ≥ 64 km/h (39.8 MPH)
= 3 time(s)