Enable Conditions
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITIONS
| Secondary Parameters | Enable Conditions |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Atmospheric pressure | ≥ 75.1 kPa (563 mmHg, 22.2 inHg) |
| Lambda value (left and right) | ≥ 0.85 and < 1.151 |
| Vehicle speed | 0 km/h (0 MPH) |
| Fuel level | ≥ 9 l (2.38 US gal, 1.98 Imp gal) |
| Engine coolant temperature | ≥ 60 °C (140 °F) |
| Elapsed time after starting the engine | ≥ 10.49 s |
| Accelerator pedal position | = 0% |
| After intake manifold pressure changes by 4 kPa (30 mmHg, 1.2 inHg) or more. | > 5.1 s |
| Elapsed time after switching neutral position switch to ON/OFF | > 5.1 s |
| Cold start diagnosis | Not in operation |