LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System (Except STI) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the bolts, springs, and nuts which secure the center exhaust pipe (rear) to the rear exhaust pipe.
    Fig 1: Locating Rear Exhaust Pipe Bolts
    G09480665Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts and self-locking nuts securing the mufflers to the rear exhaust pipes.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    Fig 2: Locating Mufflers Self-Locking Nuts
    G10265541Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    Fig 3: Locating Cushion Rubber
    G09480731Courtesy of SUBARU OF AMERICA, INC.