LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System (Except STI) >> Scavenge Pump >> Removal

Scavenge Pump: Removal

CAUTION: If engine oil is spilt onto the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Remove the oil pipe assembly. <Ref. to OIL PIPE ASSY , REMOVAL, Oil Pipe.>
  2. Remove the bolts which secure the scavenge pump to the intake rear camshaft cap RH and the cam carrier RH. Using a crowbar, remove the scavenge pump.
CAUTION: Be careful not to damage the mating surfaces of the cylinder head and scavenge pump.
Fig 1: Locating Scavenge Pump Bolts
G10267325Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals