LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake System (Induction) And Turbocharger (Except STI) >> Intake Duct >> Removal >> Intake Duct No. 3

Intake Duct No. 3

  1. Remove the collector cover. <Ref. to REMOVAL , Collector Cover.>
  2. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  3. Remove the intercooler. <Ref. to REMOVAL , Intercooler.>
  4. Remove the clip securing the brake booster vacuum hose to the intake manifold, and move the brake booster vacuum hose at the locations that do not interfere operation.
    Fig 1: Locating Brake Booster Vacuum Hose Clips
    G10266554Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the intake duct No. 3 from the throttle body.
    Fig 2: Locating Intake Duct No. 3 Clamp Bolt
    G09480084Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals