Rear Disc Rotor: Installation

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly.

Check the rear disc rotor. <Ref. to INSPECTION , Rear Disc Rotor.>
Install the disc rotor.
Adjust the parking brake. <Ref. to ADJUSTMENT , Parking Brake Assembly (Rear Disc Brake).>
Install the disc brake assembly.
Tightening torque:

Mounting bolt (except for STI model): 66 N.m (6.7 kgf-m, 48.7 ft-lb)

Mounting bolt (STI model): 65 N.m (6.6 kgf-m, 47.9 ft-lb)

Brake hose bracket: 33 N.m (3.4 kgf-m, 24.3 ft-lb)
Install the rear wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)